Model No: SOL110-2CI

Automatic volume based, 110 Lpm, 50mm connection

Puretec SOL110-2CI Commercial Water Softeners
The Puretec SOL110-2CI softens water by removing hardness ions (calcium and magnesium) also known as limescale.

Hardness, if uncontrolled, will cause scaling, eventually blocking plumbing and shortening the life of boilers, steam generators, hot water systems and urns, increasing energy use and costs.

The SOL110-2CI achieves long life of the filter bed through regeneration using brine solution which is operated through a fully automatic volumetric control valve.

The SOL110-2CI can also be used to reduce manganese levels, in some cases. Please refer to Puretec for expert advice on your application.
Price: $7,475.28Incl. GST*
*Price listed is suggested retail price. Reseller price may vary.

Find a Puretec Dealer

Features & Benefits

• Large capacity resin and brine tank.
• Complete system, just add salt.
• 50mm connections for larger flow rates.
• Weatherproof cover.
• Weatherproof transformer.
• Automatic volume based regeneration for optimised performance and salt use.

Specifications

Ordering Code
SOL110-2CI
Valve
2CI-Automatic Volume Based
Min/Max Flow Rate
-
Capacity
72,000 litres
Connection
2” BSP, 1” Drain
Min/Max Pressure
200 - 600 kPa
Operating Temperature
5 - 40°C (41 - 104°F)
Power Supply
230V AC / 50 Hz
Warranty
1 year^
Replacement Media Kits
RMK-SOL110
Accessories
WTV7400 - Microswitch kit for 2CI models.
PTE30 - Hardness test kit.
SS5000 - SoftenerSafe Media, 5 litres.
WTV7500 - Twin alternating valve for 2CI models
WTV7550 - No water bypass during regen valve
Note: Capacities are based on a hardness of 100ppm. The flow rate while the filter backwashes, needs to be equal to the stated service flow to maintain proper backwash functionality, which is critical for optimum performance of filtration systems.
Chlorine (free Chlorine) tolerance is 0.5ppm - high chlorine levels permanently damage the softening resin & is not covered under warranty. If chlorine exceeds this limit, we recommend a carbon pre-filter such as the WH2 or CFS Series. Please refer to Puretec for a specific recommendation. In any case, a carbon pre-filter is recommended to protect against chlorine spikes & prolong the resin life.
^1 year replacement parts and labour.