SOL30-E3 Softener

  • •Water softener with smart valve

  • •Reduces calcium & minerals from hard water

  • •12,000L capacity, 30 LPM

Price: $3,090.02 INC GST*

Model No: SOL30-E3

WHERE TO BUY

A WaterMark approved water softener to reduce scaling and spotting in your home or building. Insist on a certified system.

The SOL30-E3 water softener uses volumetric regeneration. This means it only backwashes when needed, based on your specific water consumption.  This smart feature significantly reduces water and salt usage compared to traditional systems.

Hard water is water that contains dissolved minerals such as limestone, iron, sulphur, magnesium and calcium. If these minerals are not removed from your water, they will cause scaling, eventually blocking plumbing and shortening the life of appliances - particularly hot water units, dishwashers, washing machines, etc.

Say ‘no’ to scale in your facility.
Minerals found in hard water build up in appliances such as hot water systems and dishwashers reducing their service life and making them less efficient. Soft water saves you money by replacing them less often and saves the environment by cutting waste.

Specifications

Ordering Code
SOL30-E3
Valve
Volumetric E3-matic
Flow Rate
30 Lpm
Capacity
12,000 litres*
Connection
1” Male BSPT, ½” Drain
Min/Max Pressure
138-862 kPa
Min/Max Temperature
0 - 48°C
Power Supply
230V AC / 50 Hz
Warranty
6 years^
Replacement Media Kits
RMK-SOL30
Accessories
WTV5090 - Micro switch for automation of external equipment.
WTV5000 - Bypass assembly for testing, and maintenance.
PTE30 - Hardness test kit
WTV5050 - Blending valve for partial hardness removal.
SS5000 - SoftenerSafe Media, 5 litres
*Based on a hardness of 100ppm. Note: Chlorine (free chlorine) tolerance is 1ppm - high chlorine levels permanently damage the softening resin & is not covered under warranty. If chlorine exceeds this limit, we recommend a carbon pre-filter such as the WH2 or CFS Series. Please refer to Puretec for a specific recommendation. In any case, a carbon pre-filter is recommended to protect against chlorine spikes & prolong the resin life.
^Warranty is 1 year parts and labour, plus 5 years parts only. Excludes consumables. Extended Warranty: For Softrol™ System models SOL30-E1, SOL30-E3, SOL40-E1, and SOL40-E3, when a Puretec pre-filter (models WH2-55, WH2-60, FILTERWALL-F3, FILTERWALL-F4, FILTERWALL-F5, FILTERWALL-F6) is installed and both Puretec cartridges and Softrol™ media are routinely replaced per product instructions, the Softrol™ System warranty extends to 10 years from purchase (1 year parts & labour, 9 years parts only, excluding consumables). This warranty excludes consumables (Puretec cartridges, Softrol™ replacement media kits), damage from misuse, neglect, improper installation, external causes, use of non-genuine parts, and labour costs after year 1. Claims: Written notification with proof of purchase and maintenance records is required for claims, subject to Puretec verification and approval.

Features & Benefits

  • •A WaterMark approved water softener to reduce scaling and spotting in your water system.
  • •Glassware is now clear and shiny with no scale, smear or spots.
  • •Protects against premature replacement of hot water systems and many other appliances and fixtures.
  • •Enjoy washing your car with a scale-free finish.
  • •It’s easier to wash soap and shampoo out completely so your shower screen is easier to clean.
  • •Now ice cubes look clearer and more appealing.
  • •Can also remove traces of metals such as copper, iron and manganese.
  • •Sleek, modern design to complement your facility.
  • •Class-leading efficiency due to premium resins and optimised flow dynamics.

Download

General Downloads

For Specifiers

Videos

Spare Parts

Replacement Media for SOL30 System

Replacement Media for SOL30 System

$244.34 INC GST*

Do you still have questions about this product?

If you have any more questions, our team is very happy to assist. Please call 0800 130 140

Here some more helpful information: