IRX150-2CI Iron Removal

Name: Puretec IRX150-2CI Iron Removal Water Treatment System
Brand: Puretec
SKU: IRX150-2CI
Price: 16300.7565 NZD
Availability: InStock
Rating: 4.9 (162 reviews)

•Reduces staining & deposits from Iron
•Removes manganese & hydrogen sulphide
•Max flow 210 Lpm, 50mm connection

Model No: IRX150-2CI

Locate A Store Near You

Model No: IRX150-2CI

Locate A Store Near You

The Puretec IRX150-2CI are advanced catalytic iron removal systems, designed specifically for applications where both iron and sediment are present. Iron is usually the cause of the notorious orange-brown staining often seen on fences and buildings, and indoors in wet areas such as toilet bowls. In addition to staining, at higher levels it causes corrosion and damage to valves and fixtures. Unlike traditional iron removal systems, the IRX Series is also suitable where low levels of Hydrogen Sulphide are present - one of the most common causes of bad odour in ground water.

Removes orange and brown staining, sediment and bad odour in ground water
The Puretec IRX150-2CI is also suitable where low levels of Hydrogen Sulphide are present - one of the most common causes of bad odour in ground water. It is also designed for applications where both iron and sediment are present. Iron is usually the cause of the notorious orange-brown staining that causes corrosion and damage to valves and fixtures.

Specifications

Ordering Code

IRX150-2CI

Valve

Automatic 2CI

pH Range

6.5 - 9

Flow Rate

150 Lpm

Maximum Flow Rate

210 Lpm

Connection

2” Male BSPT, 1½” Drain

Min/Max Pressure

138 - 862 kPa

Operating Temperature

5 - 40°C (41 - 104°F)

Power Supply

230V AC / 50 Hz

Warranty

1 year^

Replacement Media Kits

RMK-IRX150

Accessories

WTV5092 - Differential pressure switch for load based backwashing.
WTV7500 - Alternating valve for 2 system / clean water to backwash.
WTV7550 - No Bypass valve to isolate the system during regeneration.
WTV7210 - Flow meter for volume based backwash.
WTV7400 - Microswitch kit for 2CI models.

Operating Conditions: 1. Dissolved Oxygen Content Minimum 15% of the Iron. 2. Staining threshold is 0.2 to 0.3ppm. 3. Nominal filtration: 3 micron. 4. The flow rate while the filter backwashes, needs to be equal to the stated service flow to maintain proper backwash functionality, which is critical for optimum performance of filtration systems.

Features & Benefits

•Designed to reduce staining & deposits from iron, manganese and sediment.
•Prevent the staining and rust build up in your water system.
•Automatic backwash – set and forget.
•Stores system configuration and operation data in non-volatile memory.
•Up to 2” connections for minimum pressure loss.
•Weather resistant cover for controller.
•Weatherproof transformer.
•Flexible programming options.
•Volume-based backwash options available for up to 450,000/day litres from a single unit.