Auto backwash, 250Lpm, 50mm connection

Puretec IRS250-2CI, Auto backwash, 250Lpm, 50mm connection

Puretec IRS250-2CI is designed to prevent the staining and rust build up in your water system. The system reduces the level of iron and manganese, through increasing the rate of oxidization of dissolved iron and then physically filtering the iron using the deep filter bed. After hardness, iron is the most common water contaminant causing staining, thick sediment, slime and smell. It blocks up pumps, taps, filters and ruins the look of anything it comes in contact with.

IRON - The most common source of orange and brown staining.
After hardness, iron is the most common water contaminant causing staining, thick sediment, slime and smell. It blocks up pumps, taps, filters and ruins the look of anything it comes in contact with. Iron at high levels will cost you money. For water that contains bacterial iron, pre-treatment is required, please contact our water treatment team for free consultation.

Find a Puretec Dealer

Features & Benefits

• The system reduces the level of iron and manganese, through increasing the rate of oxidization of dissolved iron and then physically filtering the iron using the deep filter bed.
• Prevent the staining and rust build up in your water system.
• Automatic backwash – set and forget.
• Stores system configuration and operation data in non-volatile memory.
• Up to 2” connections for minimum pressure loss.
• Weather resistant cover for the controller.
• Weatherproof transformer.
• Flexible programming options.

Specifications

Ordering Code

IRS250-2CI

Valve

Automatic 2CI

pH Range

6.8 - 9

Flow Rate

250 Lpm

Maximum Flow Rate

310 Lpm

Connection

2” Male BSPT, 1½” Drain

Min/Max Pressure

200 - 690 kPa

Operating Temperature

5 - 40°C (41 - 104°F)

Power Supply

230V AC / 50 Hz

Warranty

1 year^

Replacement Media Kits

RMK-IRS250

Accessories

WTV5092 - Differential pressure switch for load based backwashing.
WTV7500 - Alternating valve for 2 system / clean water to backwash.
WTV7550 - No Bypass valve to isolate the system during regeneration.
WTV7210 - Flow meter for volume based backwash.
WTV7400 - Microswitch kit for 2CI models.

Operating Conditions: 1. Dissolved Oxygen Content Minimum 15% of the Iron. 2. Staining threshold is 0.2 to 0.3ppm. ^Warranty is 1 year parts and labour where applicable, subject to approval. Contact Water Treatment Special for the price.