*Discontinued* Iron Removal System, Auto BW, Service Flow 100 lpm

Model No: IRS100-2CI

WHERE TO BUY

NOTE: The Puretec IRS100-2CI is now superseded by IRX100-2CI.

Puretec IRS100-2CI is designed to prevent the staining and rust build up in your water system. The system reduces the level of iron and manganese, through increasing the rate of oxidization of dissolved iron and then physically filtering the iron using the deep filter bed. After hardness, iron is the most common water contaminant causing staining, thick sediment, slime and smell. It blocks up pumps, taps, filters and ruins the look of anything it comes in contact with.

IRON - The most common source of orange and brown staining.
After hardness, iron is the most common water contaminant causing staining, thick sediment, slime and smell. It blocks up pumps, taps, filters and ruins the look of anything it comes in contact with. Iron at high levels will cost you money. For water that contains bacterial iron, pre-treatment is required, please contact our water treatment team for free consultation.

Specifications

Ordering Code
IRS100-2CI
Valve
Automatic 2CI
pH Range
6.8 - 9
Flow Rate
100 Lpm
Maximum Flow Rate
150 Lpm
Connection
2” Male BSPT, 1” Drain
Min/Max Pressure
138 - 862 kPa
Operating Temperature
5 - 40°C (41 - 104°F)
Power Supply
230V AC / 50 Hz
Warranty
1 year^
Replacement Media Kits
RMK-IRS100
Accessories
WTV5092 - Differential pressure switch for load based backwashing.
WTV7500 - Alternating valve for 2 system / clean water to backwash.
WTV7550 - No Bypass valve to isolate the system during regeneration.
WTV7210 - Flow meter for volume based backwash.
WTV7400 - Microswitch kit for 2CI models.
Operating Conditions: 1. Dissolved Oxygen Content Minimum 15% of the Iron. 2. Staining threshold is 0.2 to 0.3ppm. ^Warranty is 1 year parts and labour where applicable, subject to approval.

Features & Benefits

  • The system reduces the level of iron and manganese, through increasing the rate of oxidization of dissolved iron and then physically filtering the iron using the deep filter bed.
  • Prevent the staining and rust build up in your water system.
  • Automatic backwash – set and forget.
  • Stores system configuration and operation data in non-volatile memory.
  • Up to 2” connections for minimum pressure loss.
  • Weather resistant cover for the controller.
  • Weatherproof transformer.
  • Flexible programming options.

Download

For Specifiers

Do you still have questions about this product?

If you have any more questions, our team is very happy to assist. Please call 0800 130 140

Here some more helpful information: